Deviant 75611 Bumper Grille for 2015-19 GMC Denali Pickups
We have provided coverage for the coolers through the gaping hole in the bumper of 2015-19 GMC Denali trucks. Powder coated stainless means you wont have rust bleeding from the inevitable rock chips that come from actually using your vehicle. Simple install. Very clean looks.
Deviant 75450 EPC Fooler for 2011-17GM Duramax Pickups
2011-17 Duramax/Allison Pickups. LML/L5P Engines.
This will take place of your EPC Solenoid in the valve body, and it works as a fooler plug in the bore. The factory solenoid will snap back into the back of the plug and remain plugged into the factory wiring harness.
The Factory LML/L5P Allison transmission runs at 80PSI of line pressure. On shifts the solenoid will spike the line pressure to 230PSI and then kick it back down to 80PSI after the shift has been made. (not enough to hold any addition horsepower)
The Deviant Race PartsEPCfoolerwill make the transmission run at a static pressure of 230PSI and will increase to 280PSI off idle also eliminating pressure drop on shifts. This allows much more clamping force to the clutch packs in turn holding more horse power and greatly improving shift quality and longevity of the transmission.
The install is simple. It takes about one hour with no need to drop the valve body out of the transmission. Simply drain fluid, drop the pan remove the factoryEPCSolenoid snap it into the back of the Deviant Race PartsEPCFoolerand install the plug like you would the factory solenoid. Reinstall pan and fluid and you are done.
This product is great for anyone with a deleted and/or tuned truck with a little extra power over stock.
Also eliminates the need for line pressure increased transmission tuning.
Deviant 78400 Transmission Line Rub Fix for 2017-19 GM 6.6L Duramax/Allison Pickups
The 2017+ GM Duramax trucks are finally starting to accumulate enough miles to show a few weak spots. One of these is the tendency for the transmission lines to rub through on the frame side of the passenger bumper mount. The fix is a new transmission line retainer that prevents this from happening.
Deviant 60601 QD Mount with Extinguisher for 1.75" Roll Bar
This quick detach fire extinguisher mount is designed to work without fail in the most stressful situations. Its quick detach pull handle is easy to grab and will not bind up while trying to retrieve your extinguisher. Compatible with any fire extinguisher that has a 3" body.
Machined from 6061 aluminum
Black anodized and engraved
Stainless steel hardware
Made in USA
ABC Dry Chemical
Large Loop Pin
Steel cylinders and aluminum valves
Deviant 60605 1.50" Billet Roll Bar Clamp
Billet Roll Bar Clamp System These clamps can be installed almost anywhere, to almost anything. Whether its mounting a light bar, windshield, or even a rifle, these modular clamps will get it done. Measuring at only a ½” thick they can fit in the tightest spots. Machined from 6061 aluminum and anodized black these feature a female M6 mounting hole securing whatever you may need.
• CNC Machined from 6061 billet aluminum • Black Anodize finish • Engraved sizes • Super Narrow ½” Mounting width • Female M6 Mounting hole
This 4" mandrel bent Intake/Resonator delete tube will replace the restrictive factory intake and resonator box on the 2017-2018 Duramax trucks. Not only does it look good it will make your engine sound good too.