Deviant 77110 Passenger Side Up-Pipe fits 2001-04 GM Duramax

$250.00

Deviant Race Parts Passenger Side Up-Pipe for 2001-04 GM 6.6L Duramax

Are you looking for a replacement passenger side up-pipe due to a blown out bellow or other failure? DRP's new up-pipe is your solution. With high temp coating, high performance bellow, laser cut flanges, it's guaranteed to fit and last.

Features:

Precision manufacturing
High performance bellow
laser cut flanges
3 out of 5 Wrenches for installation

Deviant 60207 Return Fuel Tank Sump in Silver

Deviant 60207 Return Fuel Tank Sump in Silver

$179.00

DRP's new design addresses being able to place a return sump under the factory sending unit in the tank. This is the sweet spot for all fuel levels. Having it forward or in back of the sending unit can cause issues with low fuel during those rowdy moments stabbing on the throttle or getting on the brakes hard..

Only one hole to drill in the tank means less chances for a leak. Our sump ring also has more surface area than the competitors, so you have a more positive sealing surface. The return sump uses the same size mounting hole (3.25") as our non return sump. Feel like upgrading? It will bolt right in place.

Features

Kit Comes with:
Billet Sump
1 Piece Internal Billet Ring
Square O-Ring for a LEAK FREE seal
Stainless Hardware
Barbed Fittings for fuel line

Deviant 60208 Return Fuel Tank Sump in Red

Deviant 60208 Return Fuel Tank Sump in Red

$179.00

DRP's new design addresses being able to place a return sump under the factory sending unit in the tank. This is the sweet spot for all fuel levels. Having it forward or in back of the sending unit can cause issues with low fuel during those rowdy moments stabbing on the throttle or getting on the brakes hard..

Only one hole to drill in the tank means less chances for a leak. Our sump ring also has more surface area than the competitors, so you have a more positive sealing surface. The return sump uses the same size mounting hole (3.25") as our non return sump. Feel like upgrading? It will bolt right in place.

Features

Kit Comes with:
Billet Sump
1 Piece Internal Billet Ring
Square O-Ring for a LEAK FREE seal
Stainless Hardware
Barbed Fittings for fuel line

Deviant 73411 1/2" Transmission Cooler Repair Lines For 01-05 GM Duramax

$220.00

Deviant Race Parts Transmission Repair lines for 01-05 GM 6.6L Duramax equipped Pickups with the Allison 1000 Transmission.

GM's factory transmission lines leave something to be desired. DRP saw a need to build a high quality, LIFETIME WARRANTED, part that completely replace the OEM lines. With thousands sold, we can say we've solved the problem.

Features:

1/2" Industrial Strength Hydraulic Lines
All necessary fittings and adapters to bolt up to factory locations
Full, step by step, instructions
2 out of 5 wrenches (1 wrench being easiest)
LIFETIME WARRANTY

Deviant 60203 Fuel Tank Sump - Red

$160.00

DRP's new design makes installation even simpler. Only one hole to drill in the tank means less chances for a leak. Our sump sealing ring also has more surface area than the competitors, so you have a more positive sealing surface.

Features

Kit Comes with:
Billet Sump
1 Piece Internal Billet Ring
Square O-Ring for a LEAK FREE seal
Stainless Hardware
Barbed Fitting for fuel line

Deviant 71310 LB7 Intake Elbow for 2001-2004 LB7 GM Duramax

$110.00

Deviant Race Parts 01-04 GM 6.6L Duramax LB7 Intake Elbow

Factory LB7 mouthpieces are necked down and restrict flow to the turbo. DRP's Intake Elbow eliminates the restriction by increasing the diameter to a full 3". Our Mustang Chassis Dyno has verified a 25hp gain to the wheels by just adding this piece.

This product will not fit CA emissions trucks

Features:

3.5" Mandrel Bent tubing
Slotted holes allow for easy, bolt on installation
Louder Turbo Whistle
Faster spool up
Dyno Proven 25hp Gains
2 out of 5 Wrenches for installation (1 wrench being easiest)

Deviant 70500 Power Steering Lines, Fits 01-10 GM Duramax

Deviant 70500 Power Steering Lines, Fits 01-10 GM Duramax

$185.00

Deviant Race Parts GM Power Steering Line Replacements - Your Leak Free Solution

Leaking Power Steering lines? This is the permanent fix. DRP's Braided power steering line upgrade for 01-10 GM Duramax.

Features:

Braided Stainless Hose
Leak Free "Swedge" fittings
Lifetime Warranty
3 out of 5 Wrenches for Installation

Requires permanent modification to the factory lines, removing the factory crimped rubber sections and replacing them with high performance steel braided lines that swedge into place.

Deviant 73421 5/8" Transmission Cooler Repair Lines for 01-05 GM Duramax 6.6L

$270.00

Deviant Race Parts 5/8" Transmission Repair lines for 01-05 GM 6.6L Duramax equipped Pickups with the Allison 1000 Transmission.

GM's factory transmission lines leave something to be desired. DRP saw a need to build a high quality, LIFETIME WARRANTED, part that completely replace the OEM lines. With thousands sold, we can say we've solved the problem.

Features:

5/8" Industrial Strength Hydraulic Lines
All necessary fittings and adapters to bolt up to factory locations
Full, step by step, instructions
2 out of 5 wrenches (1 wrench being easiest)
LIFETIME WARRANTY

Deviant 60205 Fuel Tank Sump - Silver

$160.00

DRP's new design makes installation even simpler. Only one hole to drill in the tank means less chances for a leak. Our sump sealing ring also has more surface area than the competitors, so you have a more positive sealing surface.

Features

Kit Comes with:
Billet Sump
1 Piece Internal Billet Ring
Square O-Ring for a LEAK FREE seal
Stainless Hardware
Barbed Fitting for fuel line

Deviant 71200 Fuel Rail Plug for 01-04 GM 6.6L Duramax LB7

Deviant 71200 Fuel Rail Plug for 01-04 GM 6.6L Duramax LB7

$59.99

Deviant Race Parts LB7 Fuel Rail Plug

This machined stainless rail plug will help eliminate DTC's from low rail pressure during demanding situations.

Features:

Replaces the factory Fuel Pressure Relief Valve
Machined Stainless Steel
Helps eliminate low rail pressure codes
3 out of 5 Wrenches for installation (1 wrench being easiest)

**Remove intake elbow and move main wire harness out of way for easiest install.

Deviant 60601 QD Mount with Extinguisher for 1.75" Roll Bar

Deviant 60601 QD Mount with Extinguisher for 1.75" Roll Bar

$239.00

This quick detach fire extinguisher mount is designed to work without fail in the most stressful situations. Its quick detach pull handle is easy to grab and will not bind up while trying to retrieve your extinguisher. Compatible with any fire extinguisher that has a 3" body.

Machined from 6061 aluminum
Black anodized and engraved
Stainless steel hardware
Made in USA

Extinguisher Specs:

ABC Dry Chemical
Large Loop Pin
Steel cylinders and aluminum valves
2.5lb Size

Deviant 77510 Tie Rod Sleeves for Stock/Leveled 1999-2010 GM 2500/3500 pickups and SUV's

$75.00

Deviant Race Parts Billet Tie Rod Sleeves for 99-10 GM 2500/3500 Pickups and SUV's - Stock and Leveled Applications only

Bent tie rods got you down? DRP anodized billet Tie Rod Sleeves are built for drag racing, sled pulling, general off-roading or a daily driver that wants to make sure they don't get stuck with weak factory tie rods.

Features:

Hex design for easy installation
T6061 Billet Aluminum
Anodized finish for a lifetime of use
Stock and leveled applications only - Lifted trucks need pt#77520
2 out of 5 Wrenches for installation

Deviant 60600 QD Fire Extinguisher Mount for 1.75" Roll Bar

Deviant 60600 QD Fire Extinguisher Mount for 1.75" Roll Bar

$169.00

This quick detach fire extinguisher mount is designed to work without fail in the most stressful situations. Its quick detach pull handle is easy to grab and will not bind up while trying to retrieve your extinguisher. Compatible with any fire extinguisher that has a 3" body.

Machined from 6061 aluminum
Black anodized and engraved
Stainless steel hardware
Made in USA

Deviant 74410 Transmission Cooler Repair Lines For 2001-09 GM KODIAK Duramax w/Allison

Deviant 74410 Transmission Cooler Repair Lines For 2001-09 GM KODIAK Duramax w/Allison

$329.00

Deviant Race Parts Transmission Repair lines for 2001-09 GM 6.6L Duramax equipped KODIAK with the Allison Transmission.

GM's factory transmission lines leave something to be desired. DRP saw a need to build a high quality, LIFETIME WARRANTED, part that completely replace the OEM lines. With thousands sold, we can say we've solved the problem. The Kodiak can come in a variety of configurations. We have sorted them out and given you all the correct pieces in one box to cover all Kodiak vehicles.

Features:

1500psi rated Industrial Strength Hydraulic Lines
All necessary fittings and adapters to bolt up to factory locations
Full, step by step, instructions
2 out of 5 wrenches (1 wrench being easiest)
LIFETIME WARRANTY

California Residents Proposition 65 Information

Deviant 60603 1.625" Billet Roll Bar Clamp

Deviant 60603 1.625" Billet Roll Bar Clamp

$28.00

Billet Roll Bar Clamp System
These clamps can be installed almost anywhere, to almost anything. Whether its mounting a light bar, windshield, or even a rifle, these modular clamps will get it done. Measuring at only a ½” thick they can fit in the tightest spots. Machined from 6061 aluminum and anodized black these feature a female M6 mounting hole securing whatever you may need.

• CNC Machined from 6061 billet aluminum
• Black Anodize finish
• Engraved sizes
• Super Narrow ½” Mounting width
• Female M6 Mounting hole

Deviant 60606 2.00" Billet Roll Bar Clamp

Deviant 60606 2.00" Billet Roll Bar Clamp

$28.00

Billet Roll Bar Clamp System
These clamps can be installed almost anywhere, to almost anything. Whether its mounting a light bar, windshield, or even a rifle, these modular clamps will get it done. Measuring at only a ½” thick they can fit in the tightest spots. Machined from 6061 aluminum and anodized black these feature a female M6 mounting hole securing whatever you may need.

• CNC Machined from 6061 billet aluminum
• Black Anodize finish
• Engraved sizes
• Super Narrow ½” Mounting width
• Female M6 Mounting hole

Deviant 60605 1.50" Billet Roll Bar Clamp

Deviant 60605 1.50" Billet Roll Bar Clamp

$28.00

Billet Roll Bar Clamp System
These clamps can be installed almost anywhere, to almost anything. Whether its mounting a light bar, windshield, or even a rifle, these modular clamps will get it done. Measuring at only a ½” thick they can fit in the tightest spots. Machined from 6061 aluminum and anodized black these feature a female M6 mounting hole securing whatever you may need.

• CNC Machined from 6061 billet aluminum
• Black Anodize finish
• Engraved sizes
• Super Narrow ½” Mounting width
• Female M6 Mounting hole

Deviant 60604 1.85" Billet Roll Bar Clamp

Deviant 60604 1.85" Billet Roll Bar Clamp

$28.00

Billet Roll Bar Clamp System
These clamps can be installed almost anywhere, to almost anything. Whether its mounting a light bar, windshield, or even a rifle, these modular clamps will get it done. Measuring at only a ½” thick they can fit in the tightest spots. Machined from 6061 aluminum and anodized black these feature a female M6 mounting hole securing whatever you may need.

• CNC Machined from 6061 billet aluminum
• Black Anodize finish
• Engraved sizes
• Super Narrow ½” Mounting width
• Female M6 Mounting hole

Deviant 60602 1.75" Billet Roll Bar Clamp

Deviant 60602 1.75" Billet Roll Bar Clamp

$28.00

Billet Roll Bar Clamp System
These clamps can be installed almost anywhere, to almost anything. Whether its mounting a light bar, windshield, or even a rifle, these modular clamps will get it done. Measuring at only a ½” thick they can fit in the tightest spots. Machined from 6061 aluminum and anodized black these feature a female M6 mounting hole securing whatever you may need.

• CNC Machined from 6061 billet aluminum
• Black Anodize finish
• Engraved sizes
• Super Narrow ½” Mounting width
• Female M6 Mounting hole

Deviant 75500 Traction Bars for 2011-19 GM 2500/3500 Pickups

$625.00

Every leaf sprung truck has the issue of axle wrap. Once more power is added, it can become worse and shows up as wheel hop. This can result in many costly repairs including broken U-Joints, drive shafts, leaf springs, and much more. On top of that, the power is not being put to the ground. To fix this issue the axle needs to be prevented from rotating. That is where traction bars come in.

Deviant Race Parts Traction bars

Completely eliminates axle wrap
Will not limit articulation
Perfect for Towing, Racing, Sled pulling
Weld on kit
1 ¼” joints are 100% rebuildable
Super durable powder coat finish (weld on flanges are bare)
CNC laser cut and formed brackets