Deviant 60207 Return Fuel Tank Sump in Silver

Deviant 60207 Return Fuel Tank Sump in Silver

$179.00

DRP's new design addresses being able to place a return sump under the factory sending unit in the tank. This is the sweet spot for all fuel levels. Having it forward or in back of the sending unit can cause issues with low fuel during those rowdy moments stabbing on the throttle or getting on the brakes hard..

Only one hole to drill in the tank means less chances for a leak. Our sump ring also has more surface area than the competitors, so you have a more positive sealing surface. The return sump uses the same size mounting hole (3.25") as our non return sump. Feel like upgrading? It will bolt right in place.

Features

Kit Comes with:
Billet Sump
1 Piece Internal Billet Ring
Square O-Ring for a LEAK FREE seal
Stainless Hardware
Barbed Fittings for fuel line

Deviant 60208 Return Fuel Tank Sump in Red

Deviant 60208 Return Fuel Tank Sump in Red

$179.00

DRP's new design addresses being able to place a return sump under the factory sending unit in the tank. This is the sweet spot for all fuel levels. Having it forward or in back of the sending unit can cause issues with low fuel during those rowdy moments stabbing on the throttle or getting on the brakes hard..

Only one hole to drill in the tank means less chances for a leak. Our sump ring also has more surface area than the competitors, so you have a more positive sealing surface. The return sump uses the same size mounting hole (3.25") as our non return sump. Feel like upgrading? It will bolt right in place.

Features

Kit Comes with:
Billet Sump
1 Piece Internal Billet Ring
Square O-Ring for a LEAK FREE seal
Stainless Hardware
Barbed Fittings for fuel line

Deviant 60203 Fuel Tank Sump - Red

$160.00

DRP's new design makes installation even simpler. Only one hole to drill in the tank means less chances for a leak. Our sump sealing ring also has more surface area than the competitors, so you have a more positive sealing surface.

Features

Kit Comes with:
Billet Sump
1 Piece Internal Billet Ring
Square O-Ring for a LEAK FREE seal
Stainless Hardware
Barbed Fitting for fuel line

Deviant 86601 Exhaust Manifold Installation Bolt Kit For 5.9L and 6.7L Cummins

$22.49

We use these allen head bolts for our second gen turbo kits. Black oxide finish and lock washers ensure they will not loosen up on you. Compatable with all aftermarket manifolds, its a nice finishing touch to your install.

Deviant 87610 Cummins Oil Drain Fitting

$14.00

Deviant Race Parts 10 AN billet Oil Drain fitting for aftermarket turbo systems. O-ring fit wont leak. Hex shank to easily tighten with common hand tools.

Deviant 85200 Rail Plug For 07.5+ 6.7 Cummins

Deviant 85200 Rail Plug For 07.5+ 6.7 Cummins

$36.99

Deviant Race Parts now offers our own Fuel Rail Plug for the 2007.5-2010 6.7L Cummins. This Plug will take the place of stock Fuel Pressure Relief Valve (FPRV), and solve your low rail pressure codes, (P0087 and P1093). this Plug will not allow pressure to drop under wide open throttle when pressure is most desired.

Deviant 83600 2nd Gen Style S300/S400 Oil Drain Line Kit

Deviant 83600 2nd Gen Style S300/S400 Oil Drain Line Kit

$99.95

Deviant 83600 Oil Drain Line Kit

This kit allows an easy way to fit the oil drain on your newly installed turbo. The combination of billet aluminum block fitting, one piece turbo drain to 10AN adapter and stainless drain line ensures a leak free installation.

This product is meant to fit turbo installations using 2nd gen manifolds only. Engine blocks must be 1999 and newer.

Deviant 60205 Fuel Tank Sump - Silver

$160.00

DRP's new design makes installation even simpler. Only one hole to drill in the tank means less chances for a leak. Our sump sealing ring also has more surface area than the competitors, so you have a more positive sealing surface.

Features

Kit Comes with:
Billet Sump
1 Piece Internal Billet Ring
Square O-Ring for a LEAK FREE seal
Stainless Hardware
Barbed Fitting for fuel line

Deviant 60601 QD Mount with Extinguisher for 1.75" Roll Bar

Deviant 60601 QD Mount with Extinguisher for 1.75" Roll Bar

$239.00

This quick detach fire extinguisher mount is designed to work without fail in the most stressful situations. Its quick detach pull handle is easy to grab and will not bind up while trying to retrieve your extinguisher. Compatible with any fire extinguisher that has a 3" body.

Machined from 6061 aluminum
Black anodized and engraved
Stainless steel hardware
Made in USA

Extinguisher Specs:

ABC Dry Chemical
Large Loop Pin
Steel cylinders and aluminum valves
2.5lb Size

Deviant 86364 S464 2nd Gen Single turbo kit for 10-12 6.7L Cummins Pickups

$2,349.00

Deviant Race Parts 2nd Gen. Style Turbo Kit. We have developed this kit in house to resolve issues with installing larger frame turbos (S400 style) in the factory 2nd gen. location, allowing a wider variety of turbos to choose from.

Kit includes:

ATS 3 Piece T4 Manifold
New Manifold Gaskets
New Manifold Bolt Kit
Comes with BorgWarner S464 Turbo
New HX40 Style Down Pipe
New Oil Feed and Drain Lines
5" Powdercoated Intake with Re-useable filter and premolded intake boot
Powdercoated Hot Side Intercooler Pipe
All Clamps, plugs and hardware necessary to install the DRP kit without extra trips to the hardware store.

Deviant 60600 QD Fire Extinguisher Mount for 1.75" Roll Bar

Deviant 60600 QD Fire Extinguisher Mount for 1.75" Roll Bar

$169.00

This quick detach fire extinguisher mount is designed to work without fail in the most stressful situations. Its quick detach pull handle is easy to grab and will not bind up while trying to retrieve your extinguisher. Compatible with any fire extinguisher that has a 3" body.

Machined from 6061 aluminum
Black anodized and engraved
Stainless steel hardware
Made in USA

Deviant 86367 S467.7 2nd Gen Single turbo kit for 10-12 6.7L Cummins Pickups

$2,749.00

Deviant Race Parts 2nd Gen. Style Turbo Kit. We have developed this kit in house to resolve issues with installing larger frame turbos (S400 style) in the factory 2nd gen. location, allowing a wider variety of turbos to choose from.

Kit includes:

ATS 3 Piece T4 Manifold
New Manifold Gaskets
New Manifold Bolt Kit
Comes with BorgWarner S464 Turbo
New HX40 Style Down Pipe
New Oil Feed and Drain Lines
5" Powdercoated Intake with Re-useable filter and premolded intake boot
Powdercoated Hot Side Intercooler Pipe
All Clamps, plugs and hardware necessary to install the DRP kit without extra trips to the hardware store.

Deviant 86300 Air Intake System for 2010-12 Cummins

Deviant 86300 Air Intake System for 2010-12 Cummins

$329.00

4” mandrel bent tube construction for smooth transitions and maximum air flow
100% Tig welded
Enclosed air box to keep hot air out
Improved spool time and sound over factory intake
Provisions for CCV
Will not void factory warranty
Black powder coated finish
Oiled Filter for great filtration and performance
American made

Deviant 60603 1.625" Billet Roll Bar Clamp

Deviant 60603 1.625" Billet Roll Bar Clamp

$28.00

Billet Roll Bar Clamp System
These clamps can be installed almost anywhere, to almost anything. Whether its mounting a light bar, windshield, or even a rifle, these modular clamps will get it done. Measuring at only a ½” thick they can fit in the tightest spots. Machined from 6061 aluminum and anodized black these feature a female M6 mounting hole securing whatever you may need.

• CNC Machined from 6061 billet aluminum
• Black Anodize finish
• Engraved sizes
• Super Narrow ½” Mounting width
• Female M6 Mounting hole

Deviant 60606 2.00" Billet Roll Bar Clamp

Deviant 60606 2.00" Billet Roll Bar Clamp

$28.00

Billet Roll Bar Clamp System
These clamps can be installed almost anywhere, to almost anything. Whether its mounting a light bar, windshield, or even a rifle, these modular clamps will get it done. Measuring at only a ½” thick they can fit in the tightest spots. Machined from 6061 aluminum and anodized black these feature a female M6 mounting hole securing whatever you may need.

• CNC Machined from 6061 billet aluminum
• Black Anodize finish
• Engraved sizes
• Super Narrow ½” Mounting width
• Female M6 Mounting hole

Deviant 60605 1.50" Billet Roll Bar Clamp

Deviant 60605 1.50" Billet Roll Bar Clamp

$28.00

Billet Roll Bar Clamp System
These clamps can be installed almost anywhere, to almost anything. Whether its mounting a light bar, windshield, or even a rifle, these modular clamps will get it done. Measuring at only a ½” thick they can fit in the tightest spots. Machined from 6061 aluminum and anodized black these feature a female M6 mounting hole securing whatever you may need.

• CNC Machined from 6061 billet aluminum
• Black Anodize finish
• Engraved sizes
• Super Narrow ½” Mounting width
• Female M6 Mounting hole

Deviant 60604 1.85" Billet Roll Bar Clamp

Deviant 60604 1.85" Billet Roll Bar Clamp

$28.00

Billet Roll Bar Clamp System
These clamps can be installed almost anywhere, to almost anything. Whether its mounting a light bar, windshield, or even a rifle, these modular clamps will get it done. Measuring at only a ½” thick they can fit in the tightest spots. Machined from 6061 aluminum and anodized black these feature a female M6 mounting hole securing whatever you may need.

• CNC Machined from 6061 billet aluminum
• Black Anodize finish
• Engraved sizes
• Super Narrow ½” Mounting width
• Female M6 Mounting hole

Deviant 60602 1.75" Billet Roll Bar Clamp

Deviant 60602 1.75" Billet Roll Bar Clamp

$28.00

Billet Roll Bar Clamp System
These clamps can be installed almost anywhere, to almost anything. Whether its mounting a light bar, windshield, or even a rifle, these modular clamps will get it done. Measuring at only a ½” thick they can fit in the tightest spots. Machined from 6061 aluminum and anodized black these feature a female M6 mounting hole securing whatever you may need.

• CNC Machined from 6061 billet aluminum
• Black Anodize finish
• Engraved sizes
• Super Narrow ½” Mounting width
• Female M6 Mounting hole

Deviant 75500 Traction Bars for 2011-19 GM 2500/3500 Pickups

$625.00

Every leaf sprung truck has the issue of axle wrap. Once more power is added, it can become worse and shows up as wheel hop. This can result in many costly repairs including broken U-Joints, drive shafts, leaf springs, and much more. On top of that, the power is not being put to the ground. To fix this issue the axle needs to be prevented from rotating. That is where traction bars come in.

Deviant Race Parts Traction bars

Completely eliminates axle wrap
Will not limit articulation
Perfect for Towing, Racing, Sled pulling
Weld on kit
1 ¼” joints are 100% rebuildable
Super durable powder coat finish (weld on flanges are bare)
CNC laser cut and formed brackets

Deviant 60500-80 Weld on Traction Bars 80" for 4" Axle Tubes

Deviant 60500-80 Weld on Traction Bars 80" for 4" Axle Tubes

$549.00

Every leaf sprung truck has the issue of axle wrap. Once more power is added, it can become worse and shows up as wheel hop. This can result in many costly repairs including broken U-Joints, drive shafts, leaf springs, and much more. On top of that, the power is not being put to the ground. To fix this issue the axle needs to be prevented from rotating. That is where traction bars come in.

Deviant Race Parts Traction bars

Completely eliminates axle wrap
Will not limit articulation
Perfect for Towing, Racing, Sled pulling
Weld on kit
1 ¼” joints are 100% rebuildable
Super durable powder coat finish (weld on flanges are bare)
CNC laser cut and formed brackets