Deviant 75450 EPC Fooler for 2011-17GM Duramax Pickups

$59.00

2011-17 Duramax/Allison Pickups. LML/L5P Engines.

This will take place of your EPC Solenoid in the valve body, and it works as a fooler plug in the bore. The factory solenoid will snap back into the back of the plug and remain plugged into the factory wiring harness.

The Factory LML/L5P Allison transmission runs at 80PSI of line pressure. On shifts the solenoid will spike the line pressure to 230PSI and then kick it back down to 80PSI after the shift has been made. (not enough to hold any addition horsepower)

The Deviant Race Parts EPC fooler will make the transmission run at a static pressure of 230PSI and will increase to 280PSI off idle also eliminating pressure drop on shifts. This allows much more clamping force to the clutch packs in turn holding more horse power and greatly improving shift quality and longevity of the transmission.

The install is simple. It takes about one hour with no need to drop the valve body out of the transmission. Simply drain fluid, drop the pan remove the factory EPC Solenoid snap it into the back of the Deviant Race Parts EPC Fooler and install the plug like you would the factory solenoid. Reinstall pan and fluid and you are done.

This product is great for anyone with a deleted and/or tuned truck with a little extra power over stock.

Also eliminates the need for line pressure increased transmission tuning.

Deviant 78400 Transmission Line Rub Fix for 2017-19 GM 6.6L Duramax/Allison Pickups

$19.99

The 2017+ GM Duramax trucks are finally starting to accumulate enough miles to show a few weak spots. One of these is the tendency for the transmission lines to rub through on the frame side of the passenger bumper mount. The fix is a new transmission line retainer that prevents this from happening.

Deviant 60601 QD Mount with Extinguisher for 1.75" Roll Bar

Deviant 60601 QD Mount with Extinguisher for 1.75" Roll Bar

$239.00

This quick detach fire extinguisher mount is designed to work without fail in the most stressful situations. Its quick detach pull handle is easy to grab and will not bind up while trying to retrieve your extinguisher. Compatible with any fire extinguisher that has a 3" body.

Machined from 6061 aluminum
Black anodized and engraved
Stainless steel hardware
Made in USA

Extinguisher Specs:

ABC Dry Chemical
Large Loop Pin
Steel cylinders and aluminum valves
2.5lb Size

Deviant 60605 1.50" Billet Roll Bar Clamp

Deviant 60605 1.50" Billet Roll Bar Clamp

$28.00

Billet Roll Bar Clamp System
These clamps can be installed almost anywhere, to almost anything. Whether its mounting a light bar, windshield, or even a rifle, these modular clamps will get it done. Measuring at only a ½” thick they can fit in the tightest spots. Machined from 6061 aluminum and anodized black these feature a female M6 mounting hole securing whatever you may need.

• CNC Machined from 6061 billet aluminum
• Black Anodize finish
• Engraved sizes
• Super Narrow ½” Mounting width
• Female M6 Mounting hole

Deviant 78310 Factory Replacement Intake Tube for 2017-19 GM 6.6L Duramax

Deviant 78310 Factory Replacement Intake Tube for 2017-19 GM 6.6L Duramax

$129.00

This 4" mandrel bent Intake/Resonator delete tube will replace the restrictive factory intake and resonator box on the 2017-2018 Duramax trucks. Not only does it look good it will make your engine sound good too.

Kit Includes:

Powdercoated Intake/Resonator delete tube
2) 4" Silicone couplers
4) 4" Clamps

Deviant 60600 QD Fire Extinguisher Mount for 1.75" Roll Bar

Deviant 60600 QD Fire Extinguisher Mount for 1.75" Roll Bar

$169.00

This quick detach fire extinguisher mount is designed to work without fail in the most stressful situations. Its quick detach pull handle is easy to grab and will not bind up while trying to retrieve your extinguisher. Compatible with any fire extinguisher that has a 3" body.

Machined from 6061 aluminum
Black anodized and engraved
Stainless steel hardware
Made in USA

Deviant 60603 1.625" Billet Roll Bar Clamp

Deviant 60603 1.625" Billet Roll Bar Clamp

$28.00

Billet Roll Bar Clamp System
These clamps can be installed almost anywhere, to almost anything. Whether its mounting a light bar, windshield, or even a rifle, these modular clamps will get it done. Measuring at only a ½” thick they can fit in the tightest spots. Machined from 6061 aluminum and anodized black these feature a female M6 mounting hole securing whatever you may need.

• CNC Machined from 6061 billet aluminum
• Black Anodize finish
• Engraved sizes
• Super Narrow ½” Mounting width
• Female M6 Mounting hole

Deviant 60606 2.00" Billet Roll Bar Clamp

Deviant 60606 2.00" Billet Roll Bar Clamp

$28.00

Billet Roll Bar Clamp System
These clamps can be installed almost anywhere, to almost anything. Whether its mounting a light bar, windshield, or even a rifle, these modular clamps will get it done. Measuring at only a ½” thick they can fit in the tightest spots. Machined from 6061 aluminum and anodized black these feature a female M6 mounting hole securing whatever you may need.

• CNC Machined from 6061 billet aluminum
• Black Anodize finish
• Engraved sizes
• Super Narrow ½” Mounting width
• Female M6 Mounting hole

Deviant 60604 1.85" Billet Roll Bar Clamp

Deviant 60604 1.85" Billet Roll Bar Clamp

$28.00

Billet Roll Bar Clamp System
These clamps can be installed almost anywhere, to almost anything. Whether its mounting a light bar, windshield, or even a rifle, these modular clamps will get it done. Measuring at only a ½” thick they can fit in the tightest spots. Machined from 6061 aluminum and anodized black these feature a female M6 mounting hole securing whatever you may need.

• CNC Machined from 6061 billet aluminum
• Black Anodize finish
• Engraved sizes
• Super Narrow ½” Mounting width
• Female M6 Mounting hole

Deviant 60602 1.75" Billet Roll Bar Clamp

Deviant 60602 1.75" Billet Roll Bar Clamp

$28.00

Billet Roll Bar Clamp System
These clamps can be installed almost anywhere, to almost anything. Whether its mounting a light bar, windshield, or even a rifle, these modular clamps will get it done. Measuring at only a ½” thick they can fit in the tightest spots. Machined from 6061 aluminum and anodized black these feature a female M6 mounting hole securing whatever you may need.

• CNC Machined from 6061 billet aluminum
• Black Anodize finish
• Engraved sizes
• Super Narrow ½” Mounting width
• Female M6 Mounting hole

Deviant 75611 Bumper Grille for 2015-19 GMC Denali Pickups

Deviant 75611 Bumper Grille for 2015-19 GMC Denali Pickups

$99.00

We have provided coverage for the coolers through the gaping hole in the bumper of 2015-19 GMC Denali trucks. Powder coated stainless means you wont have rust bleeding from the inevitable rock chips that come from actually using your vehicle. Simple install. Very clean looks.

Deviant 60500-80 Weld on Traction Bars 80" for 4" Axle Tubes

Deviant 60500-80 Weld on Traction Bars 80" for 4" Axle Tubes

$549.00

Every leaf sprung truck has the issue of axle wrap. Once more power is added, it can become worse and shows up as wheel hop. This can result in many costly repairs including broken U-Joints, drive shafts, leaf springs, and much more. On top of that, the power is not being put to the ground. To fix this issue the axle needs to be prevented from rotating. That is where traction bars come in.

Deviant Race Parts Traction bars

Completely eliminates axle wrap
Will not limit articulation
Perfect for Towing, Racing, Sled pulling
Weld on kit
1 ¼” joints are 100% rebuildable
Super durable powder coat finish (weld on flanges are bare)
CNC laser cut and formed brackets

Deviant 75700 Upper Coolant Pipe fits 2011-18 GM Duramax Pickups

Deviant 75700 Upper Coolant Pipe fits 2011-18 GM Duramax Pickups

$119.00

This stainless steel upper radiator pipe will replace the factory rubber upper radiator hose on 2011-18 GM Duramax Pickups and give your truck a clean yet stylish look.

Kit Includes:

Stainless steel construction
Powdercoated Coolant Pipe
2 Silicone Hoses
4 T-bolt clamps

Deviant 75500 Traction Bars for 2011-19 GM 2500/3500 Pickups

$625.00

Every leaf sprung truck has the issue of axle wrap. Once more power is added, it can become worse and shows up as wheel hop. This can result in many costly repairs including broken U-Joints, drive shafts, leaf springs, and much more. On top of that, the power is not being put to the ground. To fix this issue the axle needs to be prevented from rotating. That is where traction bars come in.

Deviant Race Parts Traction bars

Completely eliminates axle wrap
Will not limit articulation
Perfect for Towing, Racing, Sled pulling
Weld on kit
1 ¼” joints are 100% rebuildable
Super durable powder coat finish (weld on flanges are bare)
CNC laser cut and formed brackets

Deviant 60500-70 Weld on Traction Bars 70" for 4" Axle Tubes

Deviant 60500-70 Weld on Traction Bars 70" for 4" Axle Tubes

$549.00

Every leaf sprung truck has the issue of axle wrap. Once more power is added, it can become worse and shows up as wheel hop. This can result in many costly repairs including broken U-Joints, drive shafts, leaf springs, and much more. On top of that, the power is not being put to the ground. To fix this issue the axle needs to be prevented from rotating. That is where traction bars come in.

Deviant Race Parts Traction bars

Completely eliminates axle wrap
Will not limit articulation
Perfect for Towing, Racing, Sled pulling
Weld on kit
1 ¼” joints are 100% rebuildable
Super durable powder coat finish (weld on flanges are bare)
CNC laser cut and formed brackets