Deviant 78310 Factory Replacement Intake Tube for 2017-19 GM 6.6L Duramax

Deviant 78310 Factory Replacement Intake Tube for 2017-19 GM 6.6L Duramax

$129.00

This 4" mandrel bent Intake/Resonator delete tube will replace the restrictive factory intake and resonator box on the 2017-2018 Duramax trucks. Not only does it look good it will make your engine sound good too.

Kit Includes:

Powdercoated Intake/Resonator delete tube
2) 4" Silicone couplers
4) 4" Clamps

Deviant 78400 Transmission Line Rub Fix for 2017-19 GM 6.6L Duramax/Allison Pickups

$19.99

The 2017+ GM Duramax trucks are finally starting to accumulate enough miles to show a few weak spots. One of these is the tendency for the transmission lines to rub through on the frame side of the passenger bumper mount. The fix is a new transmission line retainer that prevents this from happening.

Deviant 75611 Bumper Grille for 2015-19 GMC Denali Pickups

Deviant 75611 Bumper Grille for 2015-19 GMC Denali Pickups

$99.00

We have provided coverage for the coolers through the gaping hole in the bumper of 2015-19 GMC Denali trucks. Powder coated stainless means you wont have rust bleeding from the inevitable rock chips that come from actually using your vehicle. Simple install. Very clean looks.

Deviant 74410 Transmission Cooler Repair Lines For 2001-09 GM KODIAK Duramax w/Allison

Deviant 74410 Transmission Cooler Repair Lines For 2001-09 GM KODIAK Duramax w/Allison

$329.00

Deviant Race Parts Transmission Repair lines for 2001-09 GM 6.6L Duramax equipped KODIAK with the Allison Transmission.

GM's factory transmission lines leave something to be desired. DRP saw a need to build a high quality, LIFETIME WARRANTED, part that completely replace the OEM lines. With thousands sold, we can say we've solved the problem. The Kodiak can come in a variety of configurations. We have sorted them out and given you all the correct pieces in one box to cover all Kodiak vehicles.

Features:

1500psi rated Industrial Strength Hydraulic Lines
All necessary fittings and adapters to bolt up to factory locations
Full, step by step, instructions
2 out of 5 wrenches (1 wrench being easiest)
LIFETIME WARRANTY

California Residents Proposition 65 Information

Deviant 72810 Duramax Valve Covers Black/Milled for 2004.5-10 GM 6.6L Duramax

Deviant 72810 Duramax Valve Covers Black/Milled for 2004.5-10 GM 6.6L Duramax

$409.99

We designed these valve covers for the 2004.5-10 Duramax 6.6L engines. One piece o-ring seal, provided counter sunk fasteners makes for a very clean install. The PCV provisions are over sized to 3/4 inch, and an ORB to -12 JIC adapter is included. Finish is Black anodized with Milled accents and engraved with Deviant Race Parts logo.

Deviant 72800 Duramax Valve Covers Raw Finish for 2004.5-10 GM 6.6L Duramax

Deviant 72800 Duramax Valve Covers Raw Finish for 2004.5-10 GM 6.6L Duramax

$325.00

We designed these valve covers for the 2004.5-10 Duramax 6.6L engines. One piece o-ring seal, provided counter sunk fasteners makes for a very clean install. The PCV provisions are over sized to 3/4 inch, and an ORB to -12 JIC adapter is included. Finish is raw aluminum engraved with Deviant Race Parts logo.

Deviant 60500-80 Weld on Traction Bars 80" for 4" Axle Tubes

Deviant 60500-80 Weld on Traction Bars 80" for 4" Axle Tubes

$549.00

Every leaf sprung truck has the issue of axle wrap. Once more power is added, it can become worse and shows up as wheel hop. This can result in many costly repairs including broken U-Joints, drive shafts, leaf springs, and much more. On top of that, the power is not being put to the ground. To fix this issue the axle needs to be prevented from rotating. That is where traction bars come in.

Deviant Race Parts Traction bars

Completely eliminates axle wrap
Will not limit articulation
Perfect for Towing, Racing, Sled pulling
Weld on kit
1 ¼” joints are 100% rebuildable
Super durable powder coat finish (weld on flanges are bare)
CNC laser cut and formed brackets

Deviant 60500-70 Weld on Traction Bars 70" for 4" Axle Tubes

Deviant 60500-70 Weld on Traction Bars 70" for 4" Axle Tubes

$549.00

Every leaf sprung truck has the issue of axle wrap. Once more power is added, it can become worse and shows up as wheel hop. This can result in many costly repairs including broken U-Joints, drive shafts, leaf springs, and much more. On top of that, the power is not being put to the ground. To fix this issue the axle needs to be prevented from rotating. That is where traction bars come in.

Deviant Race Parts Traction bars

Completely eliminates axle wrap
Will not limit articulation
Perfect for Towing, Racing, Sled pulling
Weld on kit
1 ¼” joints are 100% rebuildable
Super durable powder coat finish (weld on flanges are bare)
CNC laser cut and formed brackets

Deviant 77530 2011-16 GM 2500HD-3500 Stainless Tie Rod Sleeves

Deviant 77530 2011-16 GM 2500HD-3500 Stainless Tie Rod Sleeves

$89.00

Deviant Race Parts 77530 Stainless Tie Rod Sleeves for 2011-2016 GM 2500HD & 3500 Pickups.

Bent tie rods got you down? DRP Stainless Tie Rod Sleeves are built for drag racing, sled pulling, general off-roading or a daily driver that wants to make sure they don't get stuck with a weak factory tie rod.

Features:

CNC Machined Stainless Steel
Replaces the factory lock nut
Corrosion Resistant
2 out of 5 Wrenches for installtion (1 wrench being the easiest)

Deviant 77520 Tie Rod Sleeves for Lifted 1999-2010 GM 2500/3500 pickups and SUV's

$0.00

Deviant Race Parts Billet Tie Rod Sleeves for 99-10 GM 2500/3500 Pickups and SUV's - Lifted Applications only

Bent tie rods got you down? DRP anodized billet Tie Rod Sleeves are built for drag racing, sled pulling, general off-roading or a daily driver that wants to make sure they don't get stuck with weak factory tie rods.

Features:

Hex design for easy installation
T6061 Billet Aluminum
Anodized finish for a lifetime of use
Lifted applications only - Stock and leveled trucks need pt#77510
2 out of 5 Wrenches for installation

Deviant 77510 Tie Rod Sleeves for Stock/Leveled 1999-2010 GM 2500/3500 pickups and SUV's

$75.00

Deviant Race Parts Billet Tie Rod Sleeves for 99-10 GM 2500/3500 Pickups and SUV's - Stock and Leveled Applications only

Bent tie rods got you down? DRP anodized billet Tie Rod Sleeves are built for drag racing, sled pulling, general off-roading or a daily driver that wants to make sure they don't get stuck with weak factory tie rods.

Features:

Hex design for easy installation
T6061 Billet Aluminum
Anodized finish for a lifetime of use
Stock and leveled applications only - Lifted trucks need pt#77520
2 out of 5 Wrenches for installation

Deviant 77110 Passenger Side Up-Pipe fits 2001-04 GM Duramax

$250.00

Deviant Race Parts Passenger Side Up-Pipe for 2001-04 GM 6.6L Duramax

Are you looking for a replacement passenger side up-pipe due to a blown out bellow or other failure? DRP's new up-pipe is your solution. With high temp coating, high performance bellow, laser cut flanges, it's guaranteed to fit and last.

Features:

Precision manufacturing
High performance bellow
laser cut flanges
3 out of 5 Wrenches for installation

Deviant 76200 Rail Plug For 2004.5-10 6.6L Duramax

Deviant 76200 Rail Plug For 2004.5-10 6.6L Duramax

$36.99

Deviant Race Parts Fuel Rail Plug for the 2004.5-10 GM 6.6L Duramax - LLY/LBZ/LMM

This Plug will take the place of stock Fuel Pressure Relief Valve (FPRV), and help solve your low rail pressure codes, (P0087 and P1093). This Plug will not allow the FPRV valve to cause a pressure drop under wide open throttle when pressure is most desired.

Features:

Machined Stainless Steel
Eliminates P1093 & P0087 Codes due to FPRV valve malfunctioning.
3 out of 5 Wrenches for installation

Deviant 76151 High Flow Y-Bridge for 06-10 6.6L GM Duramax LBZ/LMM

Deviant 76151 High Flow Y-Bridge for 06-10 6.6L GM Duramax LBZ/LMM

$650.00

Deviant Race Parts High Flow Y-Bridge for 06-10 6.6L GM Duramax LBZ/LMM

Having trouble keeping your factory Y-Bridge from blowing out? Replace it with this fabricated, high performance unit from Deviant Race Parts. Dyno tests show a 20-30hp increase at the wheels when combined with the DRP EGR Upgrade Kit (Part# 73101)

Features:

20-30 hp dyno proven gains
TIG Welded
CNC Machined flanges
Fits with factory intake piping
4 out of 5 Wrenches for installation

Deviant 76130 Billet Resonator Plug for 23004.5-10 GM 6.6L Duramax

Deviant 76130 Billet Resonator Plug for 23004.5-10 GM 6.6L Duramax

$30.00

Deviant Race Parts Billet Resonator Delete Plug for 2004.5-10 GM 6.6L Duramax

Want to delete your Resonator, but don't like Plumbing Fixtures under your hood? Deviant Race Parts Billet Resonator Plug will fit YOUR needs. This Made in the USA part comes with an O-Ring seal to keep the dirt our and air in.

Features:

CNC machined billet aluminum
Anodized finish
O-ringed to keep dirt out and air in
1 out of 5 Wrenches for installation

Deviant 75700 Upper Coolant Pipe fits 2011-18 GM Duramax Pickups

Deviant 75700 Upper Coolant Pipe fits 2011-18 GM Duramax Pickups

$119.00

This stainless steel upper radiator pipe will replace the factory rubber upper radiator hose on 2011-18 GM Duramax Pickups and give your truck a clean yet stylish look.

Kit Includes:

Stainless steel construction
Powdercoated Coolant Pipe
2 Silicone Hoses
4 T-bolt clamps

Deviant 75450 EPC Fooler for 2011-17GM Duramax Pickups

$59.00

2011-17 Duramax/Allison Pickups. LML/L5P Engines.

This will take place of your EPC Solenoid in the valve body, and it works as a fooler plug in the bore. The factory solenoid will snap back into the back of the plug and remain plugged into the factory wiring harness.

The Factory LML/L5P Allison transmission runs at 80PSI of line pressure. On shifts the solenoid will spike the line pressure to 230PSI and then kick it back down to 80PSI after the shift has been made. (not enough to hold any addition horsepower)

The Deviant Race Parts EPC fooler will make the transmission run at a static pressure of 230PSI and will increase to 280PSI off idle also eliminating pressure drop on shifts. This allows much more clamping force to the clutch packs in turn holding more horse power and greatly improving shift quality and longevity of the transmission.

The install is simple. It takes about one hour with no need to drop the valve body out of the transmission. Simply drain fluid, drop the pan remove the factory EPC Solenoid snap it into the back of the Deviant Race Parts EPC Fooler and install the plug like you would the factory solenoid. Reinstall pan and fluid and you are done.

This product is great for anyone with a deleted and/or tuned truck with a little extra power over stock.

Also eliminates the need for line pressure increased transmission tuning.

Deviant 75421 5/8" Transmission Cooler Repair Lines For 2015-16 GM Duramax Pickups

$300.00

Deviant Race Parts Transmission Repair lines for 2015-16 GM 6.6L Duramax Pickups with the Allison 1000 Transmission.

GM's factory transmission lines leave something to be desired. DRP saw a need to build a high quality, LIFETIME WARRANTED, part that completely replace the OEM lines. With thousands sold, we can say we've solved the problem.

Features:

Industrial Strength Hydraulic Lines
All necessary fittings and adapters to bolt up to factory locations
Full, step by step, instructions
2 out of 5 wrenches (1 wrench being easiest)
LIFETIME WARRANTY

Deviant 75420 5/8" Transmission Cooler Repair Lines For 2011-14 GM Duramax Pickups

$300.00

Deviant Race Parts Transmission Repair lines for 2011-14 GM 6.6L Duramax Pickups with the Allison 1000 Transmission.

GM's factory transmission lines leave something to be desired. DRP saw a need to build a high quality, LIFETIME WARRANTED, part that completely replace the OEM lines. With thousands sold, we can say we've solved the problem.

Features:

Industrial Strength Hydraulic Lines
All necessary fittings and adapters to bolt up to factory locations
Full, step by step, instructions
2 out of 5 wrenches (1 wrench being easiest)
LIFETIME WARRANTY

Deviant 75411 Transmission Cooler Repair Lines For 2015-16 GM Duramax Pickups

$250.00

Deviant Race Parts Transmission Repair lines for 2015-16 GM 6.6L Duramax Pickups with the Allison 1000 Transmission.

GM's factory transmission lines leave something to be desired. DRP saw a need to build a high quality, LIFETIME WARRANTED, part that completely replace the OEM lines. With thousands sold, we can say we've solved the problem.

Features:

Industrial Strength Hydraulic Lines
All necessary fittings and adapters to bolt up to factory locations
Full, step by step, instructions
2 out of 5 wrenches (1 wrench being easiest)
LIFETIME WARRANTY